How to Fix an Error Accessing the System Registry Easily

The system registry is an important component to practically every computer, and it would actually be considered a pile of electronics if the system registry was not included. It is essential for computers based on Windows, since it is the storage location for the hardware, software, and pretty much everything that makes the computer run.

Changes and updates go directly through the system registry for storage, but sometimes things do not always go as smoothly as we wish. Not many know what to do about an error accessing the system registry, but it must be fixed in order to keep your computer running.

An error accessing the system registry is not very uncommon, and it usually occurs when old files or updates are still located within the registry. The error can occur when new updates are downloaded, new programs installed, or even when new software is being added to your computer. A window will usually pop up stating “error accessing the system registry” and not much can be done until the error is fixed.

It can result from old updates being left in the system, or even old files that were not deleted when a download or installation was incomplete. The best way to get rid of the error accessing the system registry is to find out the problem, get rid of old files, and start fresh with new updates and software to keep your computer running smooth.

Because the error accessing the system registry can occur for a number of different reasons, it can sometimes be hard to locate the specific problem. The first step is to determine what exactly triggered the error, such as a new download, new software being installed, or updates occurring to current software on the computer.

The error is most common when updates occur or when updated software is installed, since most likely older versions are still being kept within the registry. In this case, the error accessing the system registry can be easily correct. First off, the installation or update needs to be stopped. Then the system registry can be accessed by the computer owner, and software can be purchased or downloaded to fix this problem.

One of the best options for getting rid of an error accessing the system registry is a registry fix program, since it goes in and does all of the work for you. Rather than trying to find the damaged files and delete them yourself, the program knows exactly what to look for and get rid of for the error to go away.

Not only will a registry fix help to get rid of the problem occurring now, it can even help to get rid of any files and old updates that may cause problems in the future. It is beneficial for clearing your computer of any unnecessary files or programs that may be causing it to run slow, and can even prevent an error accessing the system registry in the future.

A registry fix program can either be downloaded online or purchased at an electronics store, and is a great way to fix an error accessing the system registry. It does all of the work for you, and can even improve the overall performance of your computer. It can get rid of old files, partial updates, or even programs that are no longer needed, and is perfect for fixing your error accessing the system registry.

Posted in general | Comments Off on How to Fix an Error Accessing the System Registry Easily

Understanding the Significance of Computer Hardware

We are living in an age that is highly influenced by technology. Most of the activities we need to do now are automatic or computerized. Of all the technological developments achieved in the recent past, one significant tool that got developed and which will certainly keep influencing our lives is the computer. You would agree that computers play a very basic role in our daily life, just like the television and the cell phone. We are already at a stage where life will be difficult without a computer. That makes it important to understand the way a computer works, and then be informed of what we should do if it stops working. The most important part of any computer is its hardware, in the absence of which it just can not function.

If you are really keen to assess what has gone wrong with your computer when it stops working, you should understand the working and constituents of its hardware. You should especially have solid knowledge about the computer hardware when you want to undertake its troubleshooting on your own. One important part of the hardware is the RAM memory of any computer. For running any program or application, any computer needs a RAM memory. Other than that, if the computer has a RAM with specifications that are not compatible with the programs it is expected to run, its operation will be slowed down and it would almost crawl. When choosing a computer, you need to ensure that its hardware is not outdated, otherwise you'll have to upgrade it in order to be able to use the intended program.

You must take certain basic precautions while handling the hardware of computers. The most essential precaution is to ensure that the power supply to your computer is switched off, else it could cause an electric shock. Then, before you touch any part within the computer, ensure that you are not carrying any electric charge by connecting to a grounded piece of metal or you may procure an anti-static mat or wrist band available in the market. While inspecting the hardware components, you should look for broken or damaged component, as these are most likely the reasons for the computer malfunction. If a component does not fit in the slot, you are probably trying to fit it in the incorrect slot.

Once you know the hardware employed in your computer and the role it plays in the functionality of your computer, you'll be in a position to undertake its troubleshooting when it malfunctions. Each piece of hardware contributes to the successful function of the computer. To a large extent, the working of a computer depends on the quality of its hardware, making it imperative to keep it in good condition.

Posted in general | Comments Off on Understanding the Significance of Computer Hardware

How to Repair DBF Files by Using DBF Recovery Software

As a computer user you must have heard about a DBF file or some of you have used it. DBF is a database file format used by various database software programs, such as: Visual FoxPro, Clipper, dbFast, CodeBase, MultiBase, dbXL, Arago and similar database programs. A database file is a collection of data organized in a tabular form. A DBF file can be easily opened, edited and saved by any of these database programs therefore, this file format is very popular among computer users.

The most common use of a database file is to store a large amount of data and information. The file is widely used in almost every sector, such as: corporate and educational sectors to store the data and information. It has become an essential file format for an individual and an organization.

Where this file format is very useful for users on the other hand, it may create some serious problems as well. Sometimes a DBF file may become inaccessible or invalid due to corruption. DBF is not immune to corruption; in fact, this file format is prone to corruption due to its large size and complex file structure. It might be easily corrupted due to various reasons, such as: virus attacks, malfunction in database application, hard disk drive failure, software collision, unexpected cancellation of DBF, human errors and many more. These are some common reasons which can play an important role in database file corruption.

While opening a corrupt DBF file you may receive some error messages something like these:

  • “File .dbf does not exist”.
  • “The fields in table did not match the entries in the database”.
  • “Access to table disabled due to previous error”.
  • “Database file appears corrupt: Page is of wrong type.
  • “Corrupt table”/ “index header”.
  • “Filename .dbf has become corrupted”.

These are some common errors which frequently take place at the time of corruption. For example: you are working on your DBF file, everything is fine. But all of a sudden your database application (Visual FoxPro or other) starts hanging. You have no other option other than restarting the system. But when you restart your system and open the same DBF file, in which you were working earlier, it does not open or you get an error message saying the file is corrupted or damaged. This must be very frustrating situation for any user since all the hard work will go into the vain. All the data and information stored in the file might be lost forever. You have to re-create the file, which might not be possible in some cases.

In such critical state a BKF file will definitely help you. If you have backed up the database file (which is now corrupted), then you can easily restore it from the BKF file. But sometimes the BKF file may not be available or corrupted or invalid. In this situation you can use third-party DBF recovery software. This is one of the most efficient and effective solutions to fix corrupt DBF files. The DBF recovery software is designed to repair an extremely corrupted DBF file and to restore maximum data from it. It is highly capable to resolve or fix all the errors from corrupted DBF files. The software supports all popular database applications, such as: dBase III, dBase IV, dBase V, Visual FoxPro, Clipper, dBFast, CodeBase, MultiBase, dBXL and Arago. The best feature of the software is its self-describing user interface. It requires no technical knowledge or skills to use this software. Any tech savvy and a novice user can easily and comfortably use this software to repair corrupted DBF files. The DBF Recovery software is available with free demo version. Users can download the demo version before buying the full software. This helps users to examine the features and performance.

Posted in general | Comments Off on How to Repair DBF Files by Using DBF Recovery Software

How Has Technology Changed Art?

We all are witnessing the changes being made in the art these days. Technology has the power to change anything. It is changing the traditional art into digital art.

Amazing digital art has taken place of traditional art. Digital art is exploring itself in many different ways that one can imagine. Different software is developed to increase the presence of digital art.

Photoshop Artists are one of the most common digital artists who give an amazing look to a picture with the help of imaging software and different applications.

These applications are developed with the help of technology. Anyone can be a digital artist having knowledge and proficiency in Photoshop.

Difference between traditional artists and digital artists is that traditional artists use paint and cement for their art and digital artists use imaging software and applications in their art. Some of the applications have the power to create 3D art work.

Technology has taken art into a new level of creativity. Let us talk about how technology has changed traditional art into digital art. We know that internet is ruling the world with its power. So, artists decided to present their art online with the help of internet. This is possible with use of technology.

You must have seen art galleries and attended painting exhibitions in your life. These doesn’t work well these days so artists find a way where they can get more attention and more praise for their work. Most of the artistic stuff is now seen online and is circulated to the art lovers.

There are some places where exhibitions are held and we do respect them. But presenting paintings, sculptures and art work online is in trend. Some of the artists are also showing their art on the basis of card swipe panel or coins.

How this work – when you enter coins or swipe card in the panel, the panel shows you some of the art work for a few minutes and then gets closed and if you want to see it again or explore more, further you need to swipe your card or add coins into it. This is how artists are using technology.

How digital artists are using technology for their art work

Digital artists already in touch with technology are aware of the systems that are in trend and use them to create their art work and sell them online.

Some of the professional digital artists are earning a lot of bucks by selling their art work. They can also design the ones that you want and are also ready to make any modifications you need.

They use different software to explore their skills and made it more impressive. They are using technologies that offer new ways to express their art work in a realistic way for much more time.

They are using different types of media and mix them to provide a more creative art work. Their 3D art work looks as real as it is present live in front of you.

Technology not only brings changes in education, medical field, industry and business but also brings a huge change in the art work and the artists as well.

Technology opens different paths for the artists to enter into for a good earning. They made their profession more powerful along with their art work.

In our busy lives we hardly get time to meet each other and our loved ones. How can it be possible to see exhibitions and galleries? So technology has brought this change in the art workers to show their skills and talent to people from anywhere in the world.

Technology is getting advanced and making more useful for the common man as well as artists. Technology has provided us with several things that we should be thankful. One of them is digital art work.

Posted in general | Comments Off on How Has Technology Changed Art?

Why Do We Need Software Engineering?

To understand the necessity for software engineering, we must pause briefly to look back at the recent history of computing. This history will help us to understand the problems that started to become obvious in the late sixties and early seventies, and the solutions that have led to the creation of the field of software engineering. These problems were referred to by some as “The software Crisis,” so named for the symptoms of the problem. The situation might also been called “The Complexity Barrier,” so named for the primary cause of the problems. Some refer to the software crisis in the past tense. The crisis is far from over, but thanks to the development of many new techniques that are now included under the title of software engineering, we have made and are continuing to make progress.

In the early days of computing the primary concern was with building or acquiring the hardware. Software was almost expected to take care of itself. The consensus held that “hardware” is “hard” to change, while “software” is “soft,” or easy to change. According, most people in the industry carefully planned hardware development but gave considerably less forethought to the software. If the software didn’t work, they believed, it would be easy enough to change it until it did work. In that case, why make the effort to plan?

The cost of software amounted to such a small fraction of the cost of the hardware that no one considered it very important to manage its development. Everyone, however, saw the importance of producing programs that were efficient and ran fast because this saved time on the expensive hardware. People time was assumed to save machine time. Making the people process efficient received little priority.

This approach proved satisfactory in the early days of computing, when the software was simple. However, as computing matured, programs became more complex and projects grew larger whereas programs had since been routinely specified, written, operated, and maintained all by the same person, programs began to be developed by teams of programmers to meet someone else’s expectations.

Individual effort gave way to team effort. Communication and coordination which once went on within the head of one person had to occur between the heads of many persons, making the whole process very much more complicated. As a result, communication, management, planning and documentation became critical.

Consider this analogy: a carpenter might work alone to build a simple house for himself or herself without more than a general concept of a plan. He or she could work things out or make adjustments as the work progressed. That’s how early programs were written. But if the home is more elaborate, or if it is built for someone else, the carpenter has to plan more carefully how the house is to be built. Plans need to be reviewed with the future owner before construction starts. And if the house is to be built by many carpenters, the whole project certainly has to be planned before work starts so that as one carpenter builds one part of the house, another is not building the other side of a different house. Scheduling becomes a key element so that cement contractors pour the basement walls before the carpenters start the framing. As the house becomes more complex and more people’s work has to be coordinated, blueprints and management plans are required.

As programs became more complex, the early methods used to make blueprints (flowcharts) were no longer satisfactory to represent this greater complexity. And thus it became difficult for one person who needed a program written to convey to another person, the programmer, just what was wanted, or for programmers to convey to each other what they were doing. In fact, without better methods of representation it became difficult for even one programmer to keep track of what he or she is doing.

The times required to write programs and their costs began to exceed to all estimates. It was not unusual for systems to cost more than twice what had been estimated and to take weeks, months or years longer than expected to complete. The systems turned over to the client frequently did not work correctly because the money or time had run out before the programs could be made to work as originally intended. Or the program was so complex that every attempt to fix a problem produced more problems than it fixed. As clients finally saw what they were getting, they often changed their minds about what they wanted. At least one very large military software systems project costing several hundred million dollars was abandoned because it could never be made to work properly.

The quality of programs also became a big concern. As computers and their programs were used for more vital tasks, like monitoring life support equipment, program quality took on new meaning. Since we had increased our dependency on computers and in many cases could no longer get along without them, we discovered how important it is that they work correctly.

Making a change within a complex program turned out to be very expensive. Often even to get the program to do something slightly different was so hard that it was easier to throw out the old program and start over. This, of course, was costly. Part of the evolution in the software engineering approach was learning to develop systems that are built well enough the first time so that simple changes can be made easily.

At the same time, hardware was growing ever less expensive. Tubes were replaced by transistors and transistors were replaced by integrated circuits until micro computers costing less than three thousand dollars have become several million dollars. As an indication of how fast change was occurring, the cost of a given amount of computing decreases by one half every two years. Given this realignment, the times and costs to develop the software were no longer so small, compared to the hardware, that they could be ignored.

As the cost of hardware plummeted, software continued to be written by humans, whose wages were rising. The savings from productivity improvements in software development from the use of assemblers, compilers, and data base management systems did not proceed as rapidly as the savings in hardware costs. Indeed, today software costs not only can no longer be ignored, they have become larger than the hardware costs. Some current developments, such as nonprocedural (fourth generation) languages and the use of artificial intelligence (fifth generation), show promise of increasing software development productivity, but we are only beginning to see their potential.

Another problem was that in the past programs were often before it was fully understood what the program needed to do. Once the program had been written, the client began to express dissatisfaction. And if the client is dissatisfied, ultimately the producer, too, was unhappy. As time went by software developers learned to lay out with paper and pencil exactly what they intended to do before starting. Then they could review the plans with the client to see if they met the client’s expectations. It is simpler and less expensive to make changes to this paper-and-pencil version than to make them after the system has been built. Using good planning makes it less likely that changes will have to be made once the program is finished.

Unfortunately, until several years ago no good method of representation existed to describe satisfactorily systems as complex as those that are being developed today. The only good representation of what the product will look like was the finished product itself. Developers could not show clients what they were planning. And clients could not see whether what the software was what they wanted until it was finally built. Then it was too expensive to change.

Again, consider the analogy of building construction. An architect can draw a floor plan. The client can usually gain some understanding of what the architect has planned and give feed back as to whether it is appropriate. Floor plans are reasonably easy for the layperson to understand because most people are familiar with the drawings representing geometrical objects. The architect and the client share common concepts about space and geometry. But the software engineer must represent for the client a system involving logic and information processing. Since they do not already have a language of common concepts, the software engineer must teach a new language to the client before they can communicate.

Moreover, it is important that this language be simple so it can be learned quickly.

Posted in general | Comments Off on Why Do We Need Software Engineering?

Introduction to Silk Test Architecture

Normal use of an application consists of a person manipulating a keyboard and mouse to initiate application operations. The person is said to be interacting with the GUI (Graphical User Interface). During Silk Test testing, Silk Test interacts with the GUI to submit operations to the application automatically.

Thus Silk Test can simulate the actions of a person who is exercising all the capabilities of an application and verifying the results of each operation. The simulated user (Silk test) is said to be driving the application. The application under test reacts to the simulated user exactly as it would react to a human rest. Silk Test consists of two distinct software components that execute in separate processes:

The Silk Test host software

The 4Test Agent software

Silk Test host software

The Silk Test host software is the program you use to develop, edit, compile, run and debug your 4Test scripts and test plans. This manual refers to the system that runs this program as the host machine or the Silk Test machine.

The Agent

The 4Test Agent is the software process that translates the commands in your 4Test scripts into GUI-specific commands. In order words, it is the Agent that actually drives and monitors the application you are testing. One Agent can run locally on the host machine. In a networked environment, any number of Agents can run on remote machines. This manual refers to the systems that run remote Agents as target machines. This manual refers to the systems that run remote Agents as target machines. In a client/server environment, Silk Test drives the client application by means of an Agent process running on each application’s machine. The application then drives the server just as it always does. Silk Test is also capable of driving the GUI belonging to a server or of directly driving a server database by running scripts that submit SQL statements to the database. These methods o directly manipulating the server application are intended to support testing in which the client application drives the server.

Posted in general | Comments Off on Introduction to Silk Test Architecture

Futon Frame Maintenance and Common Replacement Parts and Hardware

A little preventative maintenance of your futon frame can greatly increase how long it lasts. We recommend checking the bolts on your futon frame every month or two, depending on how often it's used. If they are loose, gently tighten them, but be careful not to over tighten them. If you have a wooden frame, you can rub a bar of Ivory soap in the arm tracks every now and then, to keep things operating smoothly.

Most of the damage that we see is from forcing the frame to operate, when it's stuck. If you are converting your frame from a bed to a sofa, or from a sofa to a bed, and it does not easily convert, stop what you are doing, and remove the mattress, and carefully examine why it's not moving easily. Usually if you try to convert the frame and you pull on one side more than the other, something will jam, and if forced, you may break something.

Normally a guest will try to make their bed in the morning, and not knowing how to do it, they may break your frame. We suggest telling your guests to leave the futon as a bed, and you'll take care of changing it from a bed to a sofa for them.

Some parts wear out, and some of the plastic parts can dry out over the years. If the bolts are not tightened, a part can move around in a way that it's not recommended to, and that can cause it to break. People ask us why they do not make some of the parts in futon frames out of metal so they're never break. The reason is, if they were metal, and something jammed up, and was forced, the seat, or back, or an arm would crack, and that would be a more costly repair.

Here's a list of some of the more common futon frame hardware and parts. This is by no means a complete listing of all the parts, but it includes most of the common parts. Some items are called more than one name, so we list them twice. Futon store that has been around a long time, might even have obsoleste parts that you might need.

If you need a part that you can not find anywhere, consult a good futon store who's willing to help you, and give them a description and a couple of pictures showing what you need and see if they are willing to help you. They may need to know the name of the manufacturer of the frame because there are many frames that look the same, but the size of the bolts or seat decks and other items will all be slightly different.

Futon Bolts
Standard Futon Hinges
Click Click Hinges
Triple Click Hinges
Futon Mattress Storage Bags
Oblong Rollers
Carriage Blocks
Round Futon Rollers
Double Futon Rollers
Nylon Roller Inserts
Futon Barrel Nuts, Nuts, and Cross Dowels
Larger Futon Barrel Nuts
Futon Seat Stoppers
Futon Storage Bags
Allen Wrenches
Larger Allen Wrenches
Plastic Leg Caps
1/2 "Futon Hardware Sets
5/8 "Futon Hardware Sets
Angle Support Brackets
Decorative Bolt Covers or Plugs
Clevis Pins and Assemblies
Various Plastic Rollers, Glides and Carriage Blocks
Stretcher Support Rails
Futon Seat Decks
Futon Back Decks
Futon Arms
Cotter Pins
Washers and Clips
Futon Slats and Supports

Posted in general | Comments Off on Futon Frame Maintenance and Common Replacement Parts and Hardware

Effective Job Numbering And Cost Code Systems

Overview

Many companies have a sequential job numbering system, but have you considered the possibility of altering the numbering sequence so you can pull reports for a certain type of project or projects by year and the informational reports that could be generated?

And, are your cost codes sufficient to cover the details you need to see in your reports? Do you lump all site related travel and subsistence into one code, or do you have the details of hotels vs. Housing and meals vs. Subsistence?

Not all software programs are sophisticated enough to allow for customized job type numbering sequences; However, even the basic job cost software systems can be adapted to allow for an advanced numbering system.

Specific Job Numbering Sequences

Advanced reporting techniques can yield a wealth of information. How jobs are numbered so ease the reporting burden so projects of a certain type and / or year can be easily excluded from the software. Samples of numbering sequences could be based on the following criteria:

· Year project was awarded

· Public vs. Private works

· Commercial vs. Residential

· Construction vs. Service

· Division (s) of the Company

If your software allows, you may start the job number with the year awarded, followed by the job type and then a sequential number. Management may request a report for gross revenue on all the commercial contractor improvement projects in 2013. If you have a numbering sequence, this would be an easy report to pull, rather than go through all your 2013 projects and manually add the numbers to obtain the Results.

The job cost master file is another good source of information if all fields are completed and there is a common usage of custom fields that can be used to pull reports.

Cost Codes – Too few or Too Many?

Often we see cost code lists that spill onto multiple pages. Most job cost software programs allow for use of one cost code for multiple categories (Labor, Materials, Direct Job Expense, etc.).

A good source to use for establishing a cost code list is the bid recap and detail sheets used when bidding projects. This will yield the different stages of labor, types of materials to install associated with that labor, the different types of equipment to be rented, categories of subcontractors and the details of direct job costs to be incurred.

These activities can be "numbered" to establish a list of cost codes. If the software allows for use of one code across multiple categories, give thought to not duplicating descriptions, but arranging codes together by "type" of work being performed, rented equipment, direct job expenses, work typically contracted out, etc.

Keeping your cost codes consistent will then allow even more sophisticated reporting – management can now ask for all commercial contractor improvement projects in 2013 and the total cost of crane rentals for the year on those specific projects.

Why Go Through These Steps?

History is a great source of information when anticipating the future. Cost details can be analyzed for specific types of jobs when preparing to bid a similar project. Historical information can be analyzed for margins on certain types of projects or a division of the company to make decisions on whether or not a certain type of work is profitable.

If fields are available in the job cost master file, reports can be declined not only by type and year but by project manager as well to look at performance and estimate vs. Actual results.

Conclusion

When developing any numbering system, consistency is important in order to maximize the reporting results. Management should determine the information they wish to see and develop job numbers and cost codes that will allow for advanced reporting not only to themselves but provide useful information to estimating, project managers and accounting as well.

Posted in general | Comments Off on Effective Job Numbering And Cost Code Systems

Recommended Software for Arena Management

When there is a little over a month left to enter the data for a thousand plus cattle penning teams into a fickle spread sheet software program that was built by good intentioned volunteers; the last thing anyone should be doing is looking for replacement software. However, as any event/entry secretary or producer knows this is sometimes the lifeline that is needed to get the job done.

The preparation of all of the necessary data combined with balancing a three-quarter of a million dollar show in the six weeks prior to its start should have been enough to do. Throwing in a new piece of software to learn and master would be considered ludicrous to say the least. The producers deemed it to be a necessity in view of the history of inconsistencies in the program currently in use.

With a three-year old recommendation in hand and very little back ground checking, Arena Management Software became the chosen lifeline. The software was purchased, loaded onto the computers, played with for a day or so and then our team went to work. The KCI support group was there, day and night, to help with the learning curve and any snags that presented themselves. Our team quickly realized that the new user-friendly software program we had taken a chance on was going to be our ongoing choice for future events. The show was a success. The producers and contestants were happy. All was good in our world!

There have been a lot of years pass by since those short six weeks when our group became acquainted with the Arena Management Software. The program still provides a user-friendly format that has the talent to produce minimal data to realms of reports. From rodeo to cattle penning events the product continues to amaze our team with its ability to perform in and out of the arena.

Posted in general | Comments Off on Recommended Software for Arena Management

Visualwize Chess Training Software: A Review

Chess enthusiasts of all levels are always seeking ways to improve their chess skills, so that they can win at chess games, whether they play professionally or socially.

One of the most effective ways to improve your chess skills is to use a chess visualization software, which enables you to practice and improve your visualization skills. Visualization is one of the most important skills you need to succeed in chess.

A program that is apparently gaining a lot of popularity and is helping many people to improve their chess is Visualwize Chess Training Software.

Let’s address the basic questions on this software.

What is it?

Visualwize is a chess training software that trains your ability to have a clear mental picture of chess moves before you make these moves on the board. This enables you to assess the implications of your moves before you make the actual moves. This therefore enables you to play better at chess, as you will be able to make the right decisions and avoid making some mistakes that would make you lost a game.

This program has 240 visualization training exercises which are designed to develop your visualization skills. It has and more than 1200 moves to visualize. These moves are real moves made by a master player in real chess games. With the software, you can train to visualize up to 8 moves ahead.

The program consists of 4 levels, level 1 being rather easy and level 4 being hard. You can order the level that suits your needs. For those who really want to significantly improve their skills, level 4, the complete program, is recommended.

How does it work – what does the program actually do?

In simple terms, the program shows a chess position from a game between two chess masters, and then, with arrows, it shows the next few moves that have been made in that position by the renowned chess masters. The arrows stop in a position where a tactic, i.e., a combination that wins the game exists.

Unlike other programs and books that use written annotations for the moves, this program uses arrows on the board. This means it reflects a realistic playing scenario, and you don’t have to take your attention and eyes from the board to read written annotations.

This is one major factor that separates this program from others that are available on the Internet today. Rather than building up the skill of moving your eyes between notation and the board, Visualwize trains you in the art of seeing unfolding moves without actually affecting the board.

On the website where the program is offered, there are many informative and short videos that you can watch, which describe how the program works.

Why is it important – what benefits can you get from this program?

It is recommended that chess players wanting to take their chess to the next level use this program because it offers several benefits:

  • You will be able to see more chess moves ahead, before you actually make any move on the board, giving you an opportunity to assess the consequences of every move before you make it.
  • You will avoid making mistakes which can make you lose a game in an instant.
  • You will make the most of your training time since you will be able to easily visualize the notation below chess diagrams.
  • You become an efficient and effective chess player – you won’t need to calculate variations several times over because you will be able to clearly the consequences of your move in your mind, saving you a lot of time.
  • You will make a wise investment that will help you significantly improve your chess – the program is favourably priced at only $30. If you were to hire a chess coach, you would pay a very high fee per hour of the coach’s time to train you.
  • It is convenient – once you purchase the program, you can train at any time of the day or night, as much as you want.

With several books and programs on how to improve chess, available today, Visualwize is considered to be a cut above the rest among many chess enthusiasts.

Posted in general | Comments Off on Visualwize Chess Training Software: A Review